| Intake manifold oil splash shield Available for V-6, 350 and 455 engines $35.00 |
| Locking dipstick and tube Locking style now has weld on tab that fits both Stage 1 and 2 heads $65 stock Locking $85 |
| Lifter valley girdles shown epoxied in $70.00 |
| Crankshaft scraper $40.00 |
| Replacement oil pump pick up tube screen $16.00 |
Buick performance parts, Buick oil pump, Buick dipstick, Buick oil screen, crank scraper,
| Oil pan baffle fits both stock and T/A replacement pans $15.95 |
| I spent many years and countless hours on the dyno, developing and producing the parts on this page which are only available from Mike's Buick Performance Parts |
| Click on the link below each product for a full description and instructions Click on picture to view a larger picture |
Oil pressure balance line $95.00
| The Scavenger / External Oil System For V-6, 350 and 455 Buicks Click here for V-6 info With optional Pressure Balance Line $725 |
| Engine transport stand $62.50 |
Currently out of stock
350 HP cylinder head rebuild kit
8 – 1.94 x 11/32 stainless steel, swirl polished undercut stem intake valves
8 – 1.50 x 11/32 stainless steel, swirl polished undercut stem exhaust valves
8 – iron allow exhaust valve seats
16 – 11/32 high quality iron valve guides
8 – intake valve seals
16 – valve spring shims
set of single valve springs with 90 lbs of seat pressure and 280 open pressure at .480 lift
set of retainers
set of valve locks
4 brass freeze plugs
Detailed instructions that any competent machinist can follow.
8 – 1.50 x 11/32 stainless steel, swirl polished undercut stem exhaust valves
8 – iron allow exhaust valve seats
16 – 11/32 high quality iron valve guides
8 – intake valve seals
16 – valve spring shims
set of single valve springs with 90 lbs of seat pressure and 280 open pressure at .480 lift
set of retainers
set of valve locks
4 brass freeze plugs
Detailed instructions that any competent machinist can follow.
$295